Potential Use of Brewer’s Spent Grain By-Product as a Component for Sustainable Thermal Mortars

Abstract

Buildings represent approximately 40% of the total energy consumption. Net-zero energy buildings (NZEBs) have lower energy demands than conventional buildings due to improved thermal insulation combined with other passive design strategies. Thermal mortars, used in insulating plasters, help improve buildings’ energy efficiency in a cost-effective manner, with minimal added thickness, even on irregular surfaces. Brewer’s spent grain (BSG) accounts for 85% of the total by-products of the brewing industry. It is a cellulosic wood material, with a composition rich in protein (20%) and fiber (70%). Considering these properties, it has potential for use as a natural aggregate in mortars and as a sustainable material for buildings aligned with circular economy principles. This work aims to characterize BSG as a natural by-product for use in thermal mortars and identify different incorporation percentages. First, BSG was characterized in terms of its water content, particle size and volume mass. Then, mortars with BSG and fine sand, with different water contents, were produced and compared to a reference mortar and two commercially available thermal mortars. The performance of the mixtures was evaluated in terms of water absorption, mechanical behavior (namely, compressive and flexural strength) and thermal behavior. BSG mortars with a 0.25 w/c ratio presented a water absorption coefficient similar to that of the reference mortar. Overall, BSG mortars presented a mechanical strength profile similar to that of conventional thermal mortars. In the thermal test, the best BSG mortar (BSG75-w/c-0.25) achieved a stationary temperature difference between surfaces that was 8% lower than that of a commercial thermal mortar and 110% higher than that of the reference mortar. In sum, the best BSG mortars had a lower w/c ratio.